Blow Down Valves

ASME 1700, 2700, 4500
The continuous blow down valves are needle valves designed for operation in open position. Their function is mainly to control a continuous flow of steam and/or water under high differential pressure.
For that reason the design and materials must be such as to minimize the effects of a fluid stream in condition of flashing or made of water containing sometimes abrasive particles.
The outlet of valves is purposely "Venturi tube" shaped; stem is rising non rotating; a local stroke indicator shows the position of the disk.
In spite of the above mentioned features, it can happen that these valves - after some operating time - are not able to ensure a tight seal, since even a slow acting erosion deteriorates the working surfaces of the disk and seat. What above does not affect its function.
The bonnet less design enables easy dismantling, inspection and maintenance.
Valve dimension must be selected according to the operating conditions.
Apply to us for more details.

Go to the on line Catalogue

Forged Steel Valves Type BPR
for Blowdown/Blowoff
with Zero Leakage after Closing Operation

ASME 1700, 2700, 4500
A standard blowdown or blowoff valve does not assure a tight sealing after some operating period: this is due to the normal erosion made by fluid between seat and disk; in case tight seal is needed, this function was performed in the past by a second valve.
Our new valve BPR carries out both functions -blowoff and tight seal - in sequence and namely: blowoff with valve suitably open and tight sealing with valve closed.
It is a "multistage" valve splitting the pressure drop along the whole disk that is along the different stages of the disk. Design of the disk, of the fluid path inside the valve as well the materials are suitable to operate with high differential pressure, therefore usually with critical flow. The consequences of these critical flows of water/steam must not affect geometry and finishing of the sealing surface, to ensure tight sealing.
This problem has been successfully solved by our new and innovative design. Valve dimension must be chosen according to the operating conditions. Apply to us for more details.
Go to the on line Catalogue

Forged Steel Valve for
Boiler Drain and Blowdown (Patented)
This BONT^Ž "RSS" valve is an absolute innovation.

The valve has been designed specifically for Boiler Blowdown.
The seats (Patented by Cesare Bonetti ) are manufactured from a "Special Compound" material combining metal and special graphite which makes the valve suitable to withstand high pressure and temperatures.

The sealing system has been carefully designed to avoid contacts of the fluid stream with the downstream seat during the normal blow-down and during the opening and closing operation.

Therefore the said seat will be never damaged by the fluid velocity. The tightness is assured for an unlimited number of operation. Up to now we may say at least 40.000 cycles.
After extensive tests carried out on field, together with exhaustive laboratory testing, this Ball Valve has proven to be the most efficient, maintenance & troubles free and cost effective "Blowdown Valve".
The valve can be manually operated, Pneumatically actuated (air to open spring to close) and electronically driven by a microprocessor specifically designed.
Features: PN 40 DIN 2401 - DN 25, 32, 40
ASME 300 - DN 1", 1ź", 1˝"
Screwed, SW and Flanged ends according European or American Standards.

BONTŽ RSS & RSSA ball valves Fire safe and TA-Luft tested
Click on the image below to see the Fire test report	Bont RSS and RSSA valves have been successfully tested according BS 6755 API 607 API 6FA Fire test procedures

Click on the image below to see the TA-Luft test report	Bont HTB valves have been successfully tested according Technical Instruction on Air Quality Control Nr. 3.1.8.4 (TA-Luft) German I.Allgemeine VwV zum Bundes-Immissionsschutzgesetz (BlmSchG)

Have also a look of the new BONT^Ž "HTB"
High Temperature High Pressure Ball Valve:
An absolute innovation!

Forged Steel Valves Type BPR for Blowdown/Blowoff with Zero Leakage after Closing Operation

Forged Steel Valves Type BPR
for Blowdown/Blowoff
with Zero Leakage after Closing Operation